esab.com/fillermetalsGAS-SHIELDED FLUX-CORED WIRES (FCAW)MILD STEEL WIRESOK Tubrod 15.14OK Tubrod 15.14 is a flux-cored, tubular wire for all-positional welding using either Ar/CO2 or CO2. The wire is suitable for all mild and medium tensile structuralsteels. The running characteristics are exceptional, using the spray mode of transfer, and this applies equally to both shielding gases. OK Tubrod 15.14 is alsouniversally approved to grade 3 by all major authorities. Shielding gas Ar/20%CO2 or CO2.Classifications Weld MetalSFA/AWS A5.20 : E71T-1MSFA/AWS A5.20 : E71T-1CEN ISO 17632-A : T 46 2 P C1 1 H5EN ISO 17632-A : T 46 2 P M21 2 H5ApprovalsABS 3YSA H5 (C1 & M21)BV SA3YM (C1)BV SA3YM (M21)CE EN 13479DB 42.039.05 (M21 and C1)DNV III YMS H5 (C1)DNV-GL III YMS (M21)LR 3YS H5 (C1 & M21)LR 3YS H5 (M21)*NAKS/HAKC 1.2 mmPRS 3YS H10 (C1 & M21)RINA 2Y S H5 (C1)RS 3YMS H5 (C1)RS 3YSH5 (C1 & M21)VdTÜV 07651Approvals are based on factory location. Please contact ESAB for more information.Welding CurrentDC+Diffusible Hydrogen< 5 ml/100gAlloy TypeC MnTypical Tensile PropertiesConditionYield StrengthTensile StrengthElongationC1 shielding gasAs Welded497 MPa588 MPa27 %Typical Charpy V-Notch PropertiesConditionTesting TemperatureImpact ValueC1 shielding gasAs Welded-20 °C110 JTypical Weld Metal Analysis %CMnSi0.051.300.54Deposition DataDiameterCurrentVoltageWire Feed SpeedDeposition Rate1.2 mm110-300 A21-32 V3.2-14.5 m/min1.3-5.8 kg/h1.4 mm130-320 A22-32 V3.0-12.5 m/min1.4-6.3 kg/h1.6 mm150-360 A24-34 V3.0-11.0 m/min2.0-6.2 kg/h410397-en_GB-FactSheet_Main-01 2021-07-21