Safety data sheet According to 1907/2006/EC (REACH), 2015/830/EU Electrolyte ENArt.-No.: 2170 EN / 2175 EN / 2171 EN / 2185 ENSECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING1.1Product identifier:Electrolyte EN1.2Relevant identified uses of the substance or mixture and uses advised against:Relevant uses: Electrolytic / Electrochemical metal marking. For professional user/industrial user only.Uses advised against: All uses not specified in this section or in section 7.31.3Details of the supplier of the safety data sheet:Bymat GmbH Neusser Straße 106 D - 41363 Jüchen, Germany Phone.: +49 (0) 21 65 / 87 28 -0 info@bymat.de1.4Emergency telephone number:+49 (0) 21 65 / 87 28 -0SECTION 2: HAZARDS IDENTIFICATION2.1Classification of the substance or mixture:CLP Regulation (EC) No 1272/2008: The product is not classified as hazardous according to CLP Regulation (EC) No 1272/2008.2.2Label elements:CLP Regulation (EC) No 1272/2008: None 2.3Other hazards:Product fails to meet PBT/vPvB criteriaSECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS3.1Substance:Non-applicable3.2Mixture:Chemical description:Mixture composed of chemical productsComponents:None of the substances contained in the mixture are above the values fixed in Annex II of Regulation (EC) No 1907/2006SECTION 4: FIRST AID MEASURES4.1Description of first aid measures: Consult a doctor in case of discomfort showing the SDS for the product.By inhalation: In case of symptoms, move the person affected into fresh air.By skin contact:In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of changes to the skin (stinging, redness, rashes, blisters,...), seek medical advice with this Safety data Sheet By eye contact:Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS for the product.By ingestion/aspiration: In case of consumption in large quantities, it is recommended to seek medical assistance.4.2Most important symptoms and effects, both acute and delayed: Acute and delayed effects are indicated in sections 2 and 11.4.3Indication of any immediate medical attention and special treatment needed: Non-applicableDate of compilation: 19/09/2016Revised: 26/02/2020Version: 3 (Replaced 2)Page 1/7- CONTINUED ON NEXT PAGE -
Safety data sheet According to 1907/2006/EC (REACH), 2015/830/EU Electrolyte ENArt.-No.: 2170 EN / 2175 EN / 2171 EN / 2185 ENSECTION 5: FIREFIGHTING MEASURES5.1Extinguishing media:Product is non-flammable, with a low risk of fire due to the flammabliity characteristics of the product in normal conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,...)5.2Special hazards arising from the substance or mixture:Due to its inflammable nature, the product does not present a fire risk under normal conditions of storage, handling and use.5.3Advice for firefighters:Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained breathing apparatus (SCBA). Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) in accordance withDirective 89/654/EC.Additional provisions: Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible tocombustion, explosion or BLEVE as a result of high temperatures. Avoid spillage of the products used to extinguish the fire into an aqueous medium.SECTION 6: ACCIDENTAL RELEASE MEASURES6.1Personal precautions, protective equipment and emergency procedures:Isolate leaks provided that there is no additional risk for the people performing this task.6.2Environmental precautions: This product is not classified as hazardous to the environment. Keep product away from drains, surface and ground water.6.3Methods and material for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustibleabsorbents. For any concern related to disposal consult section 13.6.4Reference to other sections: See sections 8 and 13.SECTION 7: HANDLING AND STORAGE7.1Precautions for safe handling: A.- Precautions for safe manipulation Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control spillsand residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and cleanlinesswhere dangerous products are used. B.- Technical recommendations for the prevention of fires and explosionsIt is recommended to transfer at a slow speed to avoid the creation of electrostatic charges that could affect flammable products.Consult section 10 for conditions and materials that should be avoided. C.- Technical recommendations to prevent ergonomic and toxicological risksDo not eat or drink during the process, washing hands afterwards with suitable cleaning products.D.- Technical recommendations to prevent environmental risksIt is not necessary to take special measures to prevent environmental risks. For more information see subsection 6.27.2Conditions for safe storage, including any incompatibilities:A.- Technical measures for storage Store in a cool, dry, well-ventilated location B.- General conditions for storage Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.57.3Specific end use(s):Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of thisproduct.Date of compilation: 19/09/2016Revised: 26/02/2020Version: 3 (Replaced 2)Page 2/7- CONTINUED ON NEXT PAGE -