Technical Datasheet3M™ Speedglas™ Heavy Duty Welding Helmet G5-01Product Description•Adjustable air flow distribution•Attachment system for additional protective accessories•Class TH3 CE, NPF 500•APF 1000, APF 25, USA NIOSH•Flip-up welding helmet suitable for grinding•Robust solution•Task light as an accessory, powered by 3M Adflo BatteryApplicationsThe product helps protect the wearer's eyes and face from sparks, spatter, harmful ultraviolet radiation (UV) and infrared radiation (IR) resulting from certain arc gas welding processes. The welding helmet also protects against certain airborne contaminants when used with an approved air delivery unit.The Speedglas heavy duty welding helmet G5-01 is designed for: •Most welding processes, such as: MMA (Stick), MIG/MAG, TIG, Low amp TIG•Cutting•GrindingApprovalsRegulation, directives and harmonized European Standards as listed in table below, which also contain information about theNotified Body that have issued the EU type-Examination certificate for the PPE (Module B) and when applicable, the Notified Body responsible for the surveillance of the qualitysystem of the manufacturing of the PPE (Module D). The EUtype-examination Certificates and Declaration of Conformity are available at www.3M.com/welding/certs. = Auto darkening welding filters shall be disposed of as electrical and electronic wasteLimitations of use•Only use with original 3M spare parts and accessories listed in the reference leaflet and within the usage conditions given in the Technical Specification•The use of substitute components, decals, paint or other modifications not specified in these user instructions might seriously impair protection and may invalidate claims under the warranty or cause the product to be noncompliant with protection classifications and approvals.•Eye protectors worn over standard ophthalmic spectacles may transmit impacts thus creating a hazard to the wearer. •The Speedglas welding helmet is not designed for overhead welding/cutting operations when there is a risk of burns from falling molten metal.•Do not use for respiratory protection against unknown atmospheric contaminants or when concentrations of contaminants are unknown or immediately dangerous to life or health (IDLH).•Do not use in atmospheres containing less than 19.5% oxygen (3M definition. Individual countries may apply their own limits on oxygen deficiency. Seek advice if in doubt).•Do not use these products in oxygen or oxygen-enriched atmospheres.•Leave the contaminated area immediately if: Any part of the system becomes damaged, airflow into the headtop decreases or stops, breathing becomes difficult, dizziness or other distress occurs, you smell or taste contaminants or irritation occurs.
3M™ Speedglas™ Heavy Duty Welding Helmet G5-01 IMPORTANT NOTICEThe use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user.Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.3M Svenska ABErnst Hedlunds väg 35785 30 GagnefSwedenwww.speedglas.com3M and Speedglas are trademarks of 3M Company. © 3M 2017. All rights reserved.Rev 2019-02-27•High winds above 2 m/s, or very high work rates (where the pressure within the head top can become negative) can reduce protection. Adjust equipment as appropriate or consider an alternative form of respiratory protective device.•Users should be clean-shaven where the respirator’s face seal comes into contact with the face.•Do not remove the welding helmet or turn off the air supply until you have vacated the contaminated area.•Respiratory filters shall only be fitted to the turbo unit and not directly to the helmet/hood.•Materials which may come into contact with the wearer’s skin are not known to cause allergic reactions to the majority of individuals. These products do not contain components made from natural rubber latex.MaterialsHelmet: PPA Front frame: PPA Visor plate:PCHead band: PA, PP, TPE, PETechnical specificationsWeight welding helmet(excl. headband and welding filter): 665 g Weight headband: 125 g Viewing area visor plate: 104 x 170 mm Head sizes: 50-64Operating conditions: -5°C to +55°C, RH ≤ 90%,non-condensing conditions.Storage conditions: -30°C to +60°C, RH ≤ 90%,non-condensing conditions.Extended period of storage: -20°C to +55°C, RH ≤ 90%,non-condensing conditions.Expected service life: 5 years depending on conditions of useSpare parts, accessories and consumables61 11 90Welding Helmet G5-01, including front cover andvisor frame without welding filter, without neck orhead protection61 11 95Inner shield with airduct and airflow controls for Welding Helmet G5-01 (including visor frame) 61 01 95Outer Shield (flip-up) incl. hinge mechanism, pivot ring and visor frame for Welding Helmet G5-01 61 30 00Visor plate, anti-fog and hard coated for Welding Helmet G5-01, pkg. of 561 05 00Front cover for inner visor for Welding Helmet G5-01 19 71 55Hinge mechanism, 1 pair for Welding Helmet G5-01 61 60 01Outer Shield Pivot Ring for Welding Helmet G5-01 61 40 00 Face seal for Welding Helmet G5-01 61 37 00Airduct breathing tube (short) incl. holder for Welding Helmet G5-01 61 37 01Holder for breathing tube for Welding Helmet G5-01 16 90 40Neck prot. rigid for Welding Helmet G5-01 19 90 41Neck prot. fabric for Welding Helmet G5-01 16 90 42Neck prot. fabric large for Welding Helmet G5-01 16 90 43Neck prot. leather for Welding Helmet G5-01 16 90 20Head prot. for Welding Helmet G5-0116 90 21Head prot. High Vis for Welding Helmet G5-01 16 90 22Head prot. Leather for Welding Helmet G5-01 16 90 23Head protection (large) for Welding Helmet G5-01 16 90 30Shroud for Welding Helmet G5-01 16 90 35Extended Protection kit (shroud and large head cover) for Welding Helmet G5-01 16 91 00Hood61 32 00Headband with assembly parts for Welding Helmet G5-0161 60 00Pivot and sliding mechanism, including pivot knobs, for Welding Helmet G5-01 61 60 02Pivot knob for Welding Helmet G5-0161 60 03Headband back part for Welding Helmet G5-01 53 62 10Cushion Part for 9100 & G5-01 Headband53 62 11Large head rest for Welding Helmet G5-01 19 80 16Sweatband towelling, pkg of 319 80 17Sweatband fleecy cotton, pkg of 319 80 18Sweatband leather, pkg of 116 92 00Task Light for Welding Helmet G5-01, including light, protection plate, cable/mounting parts and long cable16 92 10Long power cable for Task Light16 92 11Short power cable for Task Light16 92 05Protection plate for task light, pkg. of 516 92 23Pouch for Adflo Battery16 90 24Scrape guard Welding Helmet G5-01 79 01 05Carry Bag