Airkos*CR-2B01/2013 PAPRCE Approved to BS EN12941 : 1998RESPIRATORY PROTECTIVE DEVICE - POWERED FILTERINGDEVICE, INCORPORATING A WELDING HELMET ORIMPACT PROTECTIVE FACESHIELD, CLASS TH2P R SL DEVICEUSER INSTRUCTION MANUAL
For use with the PL-2B01/2013 and GT-2B01/2013 Welding helmetsImportant:This manual must be read and fully understood before using the Air unit.The manual must be retained for future reference.Compulsory Information for the use of a powered respirator with hood type head unitPlease read these instructions carefully before unpacking your CR-2B01/2013 product.Failure to comply with the instructions in this leaflet may void your warranty andadversely affect your health. If you have any questions regarding the suitability of thisproduct to your task. please contact an occupational hygienist or call the manufacturerstechnical help line.Address and Telephone number information is printed at the back of this leaflet.Contents:1. Introduction2. Approvals3. Preconditions for use4. System Overview5. Unpacking / Assembly / Usage6. Before Use7. Maintenance / Cleaning8. Fault finding9. Storage and transportation10. List of Parts and Assembly Drawing11. Technical data12. Warranty1. Introduction:The CR-2B01/2013is a respiratory protective system which is based on the principle ofcirculated over pressured air in the hood. The belt-mounted blower unit delivers air through afilter and via an air hose into a headpiece (a hood or mask). The supply of filtered air createspositive pressure inside of the headpiece, which prevents the external contaminated air fromentering the user's breathing zone.2. Approvals:The CR-2B01/2013 PAPR has been designed and manufactured to comply with EN12941:1998 as a TH2P R SL device.BS4275 (Guide to implementing an effective respiratory protective device program), which theuser is advised to read, defines an EN12941 TH2P R SL device as offering an AssignedProtection Factor of 20.