G30 Grinding Welding Helmet
1 ProfessionalQualityWelding HelmetSAFETY WARNINGS - READ BEFORE USINGWARNINGRead & Understand All Instructions Before UsingWelding helmets can only resist a certain amount of heat. Please do not place hot electrode holders inside the helmet and please do not place the helmet near naked flames or hot work surfaces. Scratched or damaged visors and lenses must always be replaced if broken, damaged or covered with spatter to the extent that vision is impaired.The user should conduct daily regular checks to ensure no damage is evident. Materials that may get in contact with the wearers skin could cause Allergic reactions to susceptible individuals. Eye-protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer.We recommend a use of the helmet and visors for a period of 5 years. The duration of use depends on various factors such as use, cleaning storage and maintenance.Please check regularly of the consumable components and replace if serviceability or visibility is suspected to be affected, and finally dispose when critical components not offered as spares are suspected to be damaged or if serviceability is affected.WARNING• This welding helmet is not suitable for laser welding.• Never place this helmet on a hot surface.• This helmet will not protect against explosive devices or corrosive liquids.• Do not make any modifications to either the lens or helmet, unless specified in this manual.• Do not use replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the operator to the risk of personal injury. • Do not immerse the helmet in water. • Do not use any solvents on the filter screen or helmet components.• Storing temperature: -20 °C ~ +85 °C (- 4 °F ~ +185 °F). The helmet should be stored in dry cool and dark area, when not using it for a long time.• Clean the lens surface regularly; do not use strong cleaning solutions. Regularly replace the cracked/scratched/pitted front lens.INSTRUCTIONS FOR USEWARNING! Before using the helmet for welding, ensure that you have read and understood the safety instructions.Information manual for the G30 welder protective helmets comply with Para 1.4 of Appendix II of the EC Regulations.G30 helmets offer permanent protection against UV/IR rays, also face and eye protection from sparks caused by the welding process.